This resource is using open-source code maintained in github (see the quick-start-guide section) and available for download from NGC

The U-Net model is a convolutional neural network for 3D image segmentation. This repository contains a 3D-UNet implementation introduced in 3D U-Net: Learning Dense Volumetric Segmentation from Sparse Annotation, with modifications described in No New-Net.

This model is trained with mixed precision using Tensor Cores on Volta, Turing, and the NVIDIA Ampere GPU architectures. Therefore, researchers can get results up to 2.3x faster than training without Tensor Cores, while experiencing the benefits of mixed precision training. This model is tested against each NGC monthly container release to ensure consistent accuracy and performance over time.

Model architecture

3D-UNet was first introduced by Olaf Ronneberger, Philip Fischer, and Thomas Brox in the paper: 3D U-Net: Learning Dense Volumetric Segmentation from Sparse Annotation. In this repository we host a 3D-UNet version adapted by Fabian Isensee et al. to brain tumor segmentation. 3D-UNet allows for seamless segmentation of 3D volumes, with high accuracy and performance, and can be adapted to solve many different segmentation problems.

The following figure shows the construction of the 3D-UNet model and its different components. 3D-UNet is composed of a contractive and an expanding path, that aims at building a bottleneck in its centermost part through a combination of convolution and pooling operations. After this bottleneck, the image is reconstructed through a combination of convolutions and upsampling. Skip connections are added with the goal of helping the backward flow of gradients in order to improve the training.

Default configuration

3D-UNet consists of a contractive (left-side) and expanding (right-side) path. It repeatedly applies unpadded convolutions followed by max pooling for downsampling. Every step in the expanding path consists of an upsampling of the feature maps and a concatenation with the correspondingly cropped feature map from the contractive path.

Feature support matrix

The following features are supported by this model.

Features

Automatic Mixed Precision (AMP)

This implementation of 3D-UNet uses AMP to implement mixed precision training. Computation graphs can be modified by TensorFlow on runtime to support mixed precision training. Detailed explanation of mixed precision can be found in the next section.

Horovod

Horovod is a distributed training framework for TensorFlow, Keras, PyTorch, and MXNet. The goal of Horovod is to make distributed deep learning fast and easy to use. For more information about how to get started with Horovod, see the Horovod: Official repository.

Multi-GPU training with Horovod

Our model uses Horovod to implement efficient multi-GPU training with NCCL. For details, see example sources in this repository or see the TensorFlow tutorial.

XLA support (experimental)

XLA is a domain-specific compiler for linear algebra that can accelerate TensorFlow models with potentially no source code changes. The results are improvements in speed and memory usage: most internal benchmarks run ~1.1-1.5x faster after XLA is enabled.

Mixed precision training

Mixed precision is the combined use of different numerical precisions in a computational method. Mixed precision training offers significant computational speedup by performing operations in half-precision format while storing minimal information in single-precision to retain as much information as possible in critical parts of the network. Since the introduction of Tensor Cores in Volta, and following with both the Turing and Ampere architectures, significant training speedups are experienced by switching to mixed precision -- up to 3x overall speedup on the most arithmetically intense model architectures. Using mixed precision training previously required two steps:

1. Porting the model to use the FP16 data type where appropriate.
2. Adding loss scaling to preserve small gradient values.

This can now be achieved using Automatic Mixed Precision (AMP) for TensorFlow to enable the full mixed precision methodology in your existing TensorFlow model code. AMP enables mixed precision training on Volta, Turing, and NVIDIA Ampere GPU architectures automatically. The TensorFlow framework code makes all necessary model changes internally.

In TF-AMP, the computational graph is optimized to use as few casts as necessary and maximize the use of FP16, and the loss scaling is automatically applied inside of supported optimizers. AMP can be configured to work with the existing tf.contrib loss scaling manager by disabling the AMP scaling with a single environment variable to perform only the automatic mixed-precision optimization. It accomplishes this by automatically rewriting all computation graphs with the necessary operations to enable mixed precision training and automatic loss scaling.

For information about:

• How to train using mixed precision, see the Mixed Precision Training paper and Training With Mixed Precision documentation.
• Techniques used for mixed precision training, see the Mixed-Precision Training of Deep Neural Networks blog.
• How to access and enable AMP for TensorFlow, see Using TF-AMP from the TensorFlow User Guide.

Enabling mixed precision

Mixed precision is enabled in TensorFlow by using the Automatic Mixed Precision (TF-AMP) extension which casts variables to half-precision upon retrieval, while storing variables in single-precision format. Furthermore, to preserve small gradient magnitudes in backpropagation, a loss scaling step must be included when applying gradients. In TensorFlow, loss scaling can be applied statically by using simple multiplication of loss by a constant value or automatically, by TF-AMP. Automatic mixed precision makes all the adjustments internally in TensorFlow, providing two benefits over manual operations. First, programmers need not modify network model code, reducing development and maintenance effort. Second, using AMP maintains forward and backward compatibility with all the APIs for defining and running TensorFlow models.

To enable mixed precision, you can simply add the values to the environmental variable inside your training script:

os.environ['TF_ENABLE_AUTO_MIXED_PRECISION'] = '1'

Exporting these variables ensures that loss scaling is performed correctly and automatically. By supplying the --amp flag to the main.py script while training in FP32/TF32, the following variables are set to their correct value for mixed precision training:

if params.amp:
  os.environ['TF_ENABLE_AUTO_MIXED_PRECISION'] = '1'

Enabling TF32

TensorFloat-32 (TF32) is the new math mode in NVIDIA A100 GPUs for handling the matrix math also called tensor operations. TF32 running on Tensor Cores in A100 GPUs can provide up to 10x speedups compared to single-precision floating-point math (FP32) on Volta GPUs.

TF32 Tensor Cores can speed up networks using FP32, typically with no loss of accuracy. It is more robust than FP16 for models which require high dynamic range for weights or activations.

For more information, refer to the TensorFloat-32 in the A100 GPU Accelerates AI Training, HPC up to 20x blog post.

TF32 is supported in the NVIDIA Ampere GPU architecture and is enabled by default.